Jablotron JA-63 „PROFI“ Installation Manual - page 30
JA-63 „PROFI“ Alarm System
- 30 -
MGK51404
Wireless siren JA-60A is designated for outdoor use. It is powered from its own AC adapter and it has a built in back up
battery. The siren wirelessly communicates with the control panel. It contains a high powered siren and a flashing light.
Besides signaling alarms, it can also provide arming and disarming chirps. The siren has built in tamper detectors. Only
one JA-60A siren can be used with each JA-63 control panel. The siren has class IP44 coverage and TWO-WAY
communication with the control panel, radio communication distance 100m. An optional external antenna AN-01 can be
used with the siren for an even better working range.
Wireless indoor siren UC-260 can be very easily installed– just plug it into a power 220V socket. It sounds when an
alarm is triggered (110dB/1m) and it can also indicate exit/entrance delay warning sounds. The siren also works as a
wireless doorbell and it can sound a chime sound if a particular detector is triggered. The UC-260 has 8 selectable
acoustic signals and its loudness is also selectable. Multiple UC-260’s can be used with a control panel.
Wireless outputs unit UC-216 is a receiver for signals from the JA-63 control panel. The unit has two output relays (X
and Y, max. load 120V / 1A each). These relays have the identical functions as outputs PgX and PgY of the control
panel. The unit requires external power from 12 to 24VDC or 15VAC. Multiple UC-216’s can be used with a control panel
and each UC-216 can receive signals from more than one control panel. The UC-216 can also be used directly with JA-
60 wireless detectors or controllers.
Wireless output unit UC-222 is a receiver for signals from the JA-63 control panel. The unit has a power output relay
(max. 250VAC / 6A). This relay has the identical function as output PgX of the control panel. The unit is powered directly
from the AC power (230 VAC). Multiple UC-222’s can be used with a control panel and each UC-222 can receive signals
from more than one control panel. The UC-222 can also be used directly with JA-60 wireless detectors or controllers.
21.4 The digital bus items:
JA-60E Wire operated keypad - can be used to operate and program the system. It is connected to the control panel by
a cable. Up to five keypads can be wired to a single control panel. The alarm system's status is indicated by the LED
indicators, the built in display and built in buzzer. Illuminated keys can be covered with a bottom hinged cover. The
keypad can also be used remotely with the JA-60U modem.
PC interface cable PC-60A - can be used to connect the control panel to a serial port (COM) on your computer. Suitable
SW, ComLink, is provided on a floppy disk or you can visit Jablotron’s Internet home page at:
www.jablotron.com
to
download a free version of it. The software is a convenient way to setup the control panel, to supervise an on line system
is, to read, view and store data from the event memory and to record other information about the system. The software
can be installed under MS Windows system.
JA-60U modem – can be used with a computer or with a keypad (JA-60E) to access alarm system remotely. Both end
user and installer can benefit from the remote access to the system. The JA-60U is supplied together with power adapter,
PC interface cable and Comlink software. The JA-60E keypad can by plugged directly to the data connecter of the
modem for remote operation with out a computer.
21.5 Wire operated items
SA-200, SA-201 Magnetic door sensors - can be used as door or window opening sensors. The built in reed contact opens
when the magnet is more than 25mm far away.
JS-20 Movement detector - PIR sensor which uses sophisticated signal processing for a high false alarm immunity. Coverage
12m/120°. Optional lenses (long corridor, pet zone) are available for this detector. The detector has a high RF signal immunity,
stand by consumption 10mA/12VDC.
GBS-210 glass break detector - its sensor covers an entire room (up to 9m), regardless of the number of windows. A
dual technology detection method (air pressure and sound analysis) is combined with digital processing to guarantee
high sensitivity to the breaking of all types of glass (Plate, Tempered, Laminated, Wired). It has stand by consumption
15mA/12VDC.
JS-25 detector – combines PIR sensor and glass break detector. This unique “two in one” solution provides 3 pairs of outputs
(PIR, Glass Break, Tamper). The detector has a high RF signal immunity, stand by consumption 15mA/12VDC.
SD-112 Smoke detector - triggers a Fire alarm when smoke is detected. It also has a built in siren. A built in ionic
chamber ensures high stability of the sensor. It has a stand by consumption of 5mA/12VDC.
GS-130, GS-133 Gas leak detectors - trigger a Fire alarm when any combustible gas is detected (natural gas, city gas,
propane, butane etc.). The detector has a built in siren and an output relay. The relay, for example, can be wired to an
electrical valve to turn off the gas supply when a leak is detected. Model GS-130 is powered directly form the AC power
network and model GS-133 is powered from the control panel - 150mA/12V.
SA-105, SA-107 indoor sirens - are powerful ordinary piezo sirens with loudness in level of 120dB/1m, power consumption
about 250mA/12V.
OS-300, OS-305 outdoor sirens - are double covered with backup power supply. External housing is made of a highly
resistive polycarbonate. Siren has class IP44 coverage, built in DC to DC converter for optimal back up battery charging. Both
models have loudness in level of 118dB/1m. Model OS-300 uses a magneto-dynamic sounder, OS-305 a piezo sounder. The
siren uses balanced loop type trigger input for higher safety and it has a sophisticated tampering protection.