Panasonic Workio DP-C401 Service Handbook - page 196
Other manuals for Workio DP-C401:
Specifications
Manual is about: Digital Color Imaging System
of
548
3-122
Chapter 3 Troubleshooting
Is +24 VDC measured between the NIP/RELEASE
SOLENOID Pin 3 (+) and GND (-)?
Y
N
Replace the NIP/RELEASE SOLENOID.
Check the wire between the PWB Pin 4 and the NIP/
RELEASE SOLENOID Pin 3 for an open circuit and poor
contact.
Follow the following FIP when the RELEASE caused a problem.
Go to the DC330 [XXX-XXX] and turn the SOL RELEASE
On.
Is +24 VDC measured between the PWB Pin 6 (+) and GND(-)?
Y
N
Go to the DC330 [XXX-XXX] and turn the SOL
RELEASE On. Is +24 VDC measured between the NIP/
RELEASE SOLENOID Pin 2 (+) and GND (-)?
Y
N
Replace the NIP/RELEASE SOLENOID.
Check the wire between the PWB Pin 6 and the NIP/
RELEASE SOLENOID Pin 2 for an open circuit and poor
contact.
Replace the PWB.