Panasonic Workio DP-C401 Service Handbook - page 253
3-179
Chapter 3 Troubleshooting
35. 008-005
#3Feed Motor (Fwd)
[PSW Display]: #3Feed Motor (Fwd)
[Operation Description]:
Feed (Turn #3Feed Motor On in paper feed direction at 192mm/sec)
On: -
[T-ON]: Off
[Cycle]: Off
[Multiple Output Prohibited Items]:
[Reference BSD]: CH7.7
36. 008-006
#3Feed Motor (Rev)
[PSW Display]: #3Feed Motor (Rev)
[Operation Description]: Lift Up
It turns Off automatically 6sec after Lift Up has started, or when the Level Snr
detected Lift Up.
On: -
[T-ON]: On
[Cycle]: Off
[Multiple Output Prohibited Items]: 8-005
[Reference BSD]: CH7.7
37. 008-007
#4Feed Motor (Fwd)
[PSW Display]: #4Feed Motor (Fwd)
[Operation Description]:
Feed (Turn #4Feed Motor On in paper feed direction at 192mm/sec)
On: -
[T-ON]: Off
[Cycle]: Off
[Multiple Output Prohibited Items]: 8-008
[Reference BSD]: CH7.8
38. 008-008
#4Feed Motor (Rev)
[PSW Display]: #4Feed Motor (Rev)
[Operation Description]: Lift Up
It turns Off automatically 6sec after Lift Up has started, or when the Level Snr
detected Lift Up.
On: -
[T-ON]: On
[Cycle]: Off
[Multiple Output Prohibited Items]: 8-007
[Reference BSD]: CH7.8
39. 008-009
Dup Motor(200.1mm/sec)
[PSW Display]: Dup Motor (200.1mm/sec)
[Operation Description]:
Start operation. Turns Off automatically at 1000msec.
On: Low
[T-ON]: On
[Cycle]: On
[Multiple Output Prohibited Items]: 8-010, 011, 012, 053, 054, 055, 056
[Reference BSD]: CH10.5
40. 008-010
Dup Motor(104mm/sec)
[PSW Display]: Dup Motor (104mm/sec)
[Operation Description]:
Start operation. Turns Off automatically at 1000msec.
On: Low
[T-ON]: On
[Cycle]: On
[Multiple Output Prohibited Items]: 8-009, 011, 012, 053, 054, 055, 056
[Reference BSD]: CH10.5
41. 008-011
Dup Motor (200.1mm/sec) Long
[PSW Display]: Dup Motor (200.1mm/sec) Long
[Operation Description]:
Start operation
On: Low
Lift Up cannot be performed when the Level Snr should detect Lift Up.
Lift Up cannot be performed when the Level Snr should detect Lift Up.