Panasonic Workio DP-C401 Service Handbook - page 264
3-190
Chapter 3 Troubleshooting
109.012-012
Rear Tamper Motor High Front On/Off
[PSW Display]: Rear Tamper Motor High Front On/Off
[Operation Description]:
Turns Off automatically after 100pulses.
On:
[T-ON]: On
[Cycle]: Off
[Multiple Output Prohibited Items]: 12-10, 12-11, 12-13, 12-14, 12-15
[Reference BSD]: CH11.6
110.012-013
Rear Tamper Motor Low Rear On/Off
[PSW Display]: Rear Tamper Motor Low Rear On/Off
[Operation Description]:
Turns Off automatically after 100pulses.
On:
[T-ON]: On
[Cycle]: Off
[Multiple Output Prohibited Items]: 12-10, 12-11, 12-12, 12-14, 12-15
[Reference BSD]: CH11.6
111.012-014
Rear Tamper Motor Middle Rear On/Off
[PSW Display]: Rear Tamper Motor Middle Rear On/Off
[Operation Description]:
Turns Off automatically after 100pulses.
On:
[T-ON]: On
[Cycle]: Off
[Multiple Output Prohibited Items]: 12-10, 12-11, 12-12, 12-13, 12-15
[Reference BSD]: CH11.6
112.012-015
Rear Tamper Motor High Rear On/Off
[PSW Display]: Rear Tamper Motor High Rear On/Off
[Operation Description]:
Turns Off automatically after 100pulses.
On:
[T-ON]: On
[Cycle]: Off
[Multiple Output Prohibited Items]: 12-10, 12-11, 12-12, 12-13, 12-14
[Reference BSD]: CH11.6
113.012-020
Staple Motor Close On/Off
[PSW Display]: Staple Motor Close On/Off
[Operation Description]:
Stops at Home Position.
On:
[T-ON]: On
[Cycle]: Off
[Multiple Output Prohibited Items]: 12-21
[Reference BSD]: CH11.8
114.012-021
Stapler Motor Reverse
[PSW Display]: Stapler Motor Reverse
[Operation Description]:
Turns Off automatically after 110msec.
On:
[T-ON]: On
[Cycle]: Off
[Multiple Output Prohibited Items]: 12-20
[Reference BSD]: CH11.8