Panasonic Workio DP-C401 Service Handbook - page 230
Other manuals for Workio DP-C401:
Specifications
Manual is about: Digital Color Imaging System
of
548
3-156
Chapter 3 Troubleshooting
3. 4. 4. 23 DC934 ADC/AGC Setup (Color Image Control)
Function Sets up the ADC target value by reading the ADC (1-gradation) patch for potential
control on the IBT with the ADC sensor. At the same time, sets up the desired LD light amount.
Procedure
1. Select the "Color Image Ctrl" tab on the Service Mode screen.
2. Select [
DC934
] on the Color Image Ctrl screen.
3. The ADC/AGC Setup screen is displayed.
4. Select [Execute].
5. Select [Close] to return to the Color Image Ctrl screen.
For detailed procedure, refer to Chapter 2 ADJ1.1.4.