Panasonic Workio DP-C401 Service Handbook - page 382
3-308
Chapter 3 Troubleshooting
3. 5. 23 DC131 770-xxx ESS IO Port/Protocol Setting NVM List
1. 770-001
[NVM Name]: Start Up Setting
[PSW Display]: Parallel Port Enable
[Initial Value]: Enable
[Setup Range]: 0~1
[Read/Write]: Read/Write
[Description]:
0: Stop
1: Start Up
2. 770-002
[NVM Name]: Print Mode
[PSW Display]: Parallel Print ModeType
[Initial Value]: Auto
[Setup Range]: 1~23
[Read/Write]: Read/Write
[Description]:
1:Auto, 14:Dump, 3:HPGL2, 5:PostScript, 2:PCL6
3. 770-003
[NVM Name]: JCL Switch
[PSW Display]: Parallel JCL Switch is Parallel PJL Switch.
[Initial Value]: ON
[Setup Range]: FALSE~TRUE
[Read/Write]: Read/Write
[Description]:
0: Off
1: On
4. 770-004
[NVM Name]: Adobe Communication Protocol
[PSW Display]: Parallel Adobe Protocol
[Initial Value]: Standard
[Setup Range]: 0~2
[Read/Write]: Read/Write
[Description]:
0: Standard
1: Binary
2: TBCP
5. 770-005
[NVM Name]: Auto Feed Time
[PSW Display]: Parallel Auto Feed Time
[Initial Value]: 6 (30 sec)
[Setup Range]: 1~255
[Read/Write]: Read/Write
[Description]: 1-255 (5-1275 sec)
6. 770-006
[NVM Name]: Input Prime
[PSW Display]: Parallel Input Prime
[Initial Value]: ON
[Setup Range]: 0~1
[Read/Write]: Read/Write
[Description]:
0: Off
1: On
7. 770-007
[NVM Name]: Bi-directional Mode
[PSW Display]: Parallel COMM Mode
[Initial Value]: ON
[Setup Range]: 0~1
[Read/Write]: Read/Write
[Description]:
0: On
1: Off
8. 770-009
[NVM Name]: Applicable Communication Specification
[PSW Display]:
[Initial Value]: 0
[Setup Range]: 0~1
[Read/Write]: Read/Write
[Description]:
0: IEEE P1284
1: Centronics
9. 770-010
[NVM Name]: Operation Speed
[PSW Display]: Ethernet Transfer Rate