Panasonic Workio DP-C401 Service Handbook - page 275
3-201
Chapter 3 Troubleshooting
10
Binary/Auto
Gradation
Correction PG
(For Printer)
LUT: C-TRA
Off IOT Off
(For gradation
correction) Gradation
pattern for gradation
correction for
printing LUT: C-TRA
Off IOT Off
To output during Auto
Gradation Correction.
For checking
CTRACS feature. The
same pattern as this
output pattern is even
output in the
CTRACS feature
(Reads the output
pattern by IIT and sets
up the color
reproducibility) inside
the Tools (opened to
customer). The test
pattern here is able to
check the setup effects
of the Printer feature.
Controller
11
Binary/Auto
Gradation
Correction PG
(For Printer)
LUT: C-TRA
Off IOT On
(For gradation
correction) Gradation
pattern for gradation
correction for
printing LUT: C-TRA
Off IOT On
To output during Auto
Gradation Correction.
For checking
CTRACS feature. The
same pattern as this
output pattern is even
output in the
CTRACS feature
(Reads the output
pattern by IIT and sets
up the color
reproducibility) inside
the Tools (opened to
customer). The test
pattern here is able to
check the setup effects
of the Printer feature.
Controller
PG
No.
Pattern Name
Overview
Purpose
PG Built-in Location
12
Binary/Auto
Gradation
Correction PG
(For Printer)
LUT: C-TRA
Off IOT Off
(For gradation
correction) Gradation
pattern for gradation
correction for
printing LUT: C-TRA
Off IOT Off
To output during Auto
Gradation Correction.
For checking
CTRACS feature. The
same pattern as this
output pattern is even
output in the
CTRACS feature
(Reads the output
pattern by IIT and sets
up the color
reproducibility) inside
the Tools (opened to
customer). The test
pattern here is able to
check the setup effects
of the Printer feature.
Controller
13
Binary/Auto
Gradation
Correction PG
(For Printer)
LUT: C-TRA
On IOT On
(For gradation
correction) Gradation
pattern for gradation
correction for
printing LUT: C-TRA
On IOT On
To output during Auto
Gradation Correction.
For checking
CTRACS feature. The
same pattern as this
output pattern is even
output in the
CTRACS feature
(Reads the output
pattern by IIT and sets
up the color
reproducibility) inside
the Tools (opened to
customer). The test
pattern here is able to
check the setup effects
of the Printer feature.
Controller
PG
No.
Pattern Name
Overview
Purpose
PG Built-in Location