Xerox 721 User Manual - Scan Mode
88
• Scanning to the Network (SCAN mode)
XEROX WIDE FORMAT COPY SYSTEM
If an internal error occurs while FTP transferring a scanned
image to a remote file system, the scanned image will be deleted
and the following error will be displayed. Setting up an FTP
destination on the Web Print Management Tool with an invalid
user name and/or password, can also cause this error.
CONTROLLER FAULT
50000017: INTERNAL FAULT
FTP TRANSFER FAILED
SCANNED IMAGE DELETED
FTP Transfer Failed Screen
Scan-to-Net:
The image file created by scanning is stored
directly on the controller hard disk for later retrieval over a
connected network by a remote system. The image is stored in
Tagged Image File Format (TIFF) 6.0 using CCITT Group 4,
CALS, Packbits, or PDF/A-1b. High resolution JPG files and
PDF/A-1b are also available with the Color Scan-to-Net option.
Files stored in SCAN mode can be retrieved over the network.
After the FreeFlow Accxes Client Tools program, which is
running on a network-connected computer, retrieves the file, the
image residing on the local hard disk is deleted automatically.
After a file has been on the local hard disk for longer than the
time specified for the FILE DELETION Timer, the system
automatically deletes the file. Refer to the Main Menu,
CONFIGURATION menu, TIMERS section of this manual for
information about setting the FILE DELETION timer.
Real-time PDF Scan-to-Net:
Processing of the image for
storage or transfer to a remote location is done at the same time
the image is being scanned. This cannot be done when using
the Color PDF Scan-to-Net feature.
Switching between COPY mode and
SCAN mode
NOTE: The COPY mode will be disabled and the READY TO COPY
screen will not be accessible when a color printer is connected to the
Controller.
To switch between the COPY mode and the SCAN mode, perform the
following steps:
1. Ensure that the READY TO COPY screen is displayed. If a
menu is displayed, press the Menu key to return to the READY
screen. If PLEASE ENTER ACCOUNT is displayed, enter a
valid User ID code, then enter a valid account number to obtain
the READY screen.
2. Press
the
Mode
key. The system switches to the SCAN mode
and the screen now displays. Pressing the Mode key again
returns the system to the COPY mode.