Xerox 721 User Manual - page 112
98
• Main Menu
XEROX WIDE FORMAT COPY SYSTEM
The CONTROL PANEL option of the CONFIGURATION menu controls
whether the beeper is used for the key click and invalid entry beeps. It
also allows selection of the font display style and the default mode of
operation for the WIDE FORMAT COPY SYSTEM.
To set the beeper, text style or default operating mode:
1. Press
the
Menu
key. The MAIN MENU screen is displayed.
2. Press
the
Enter
key to select CONFIGURATION. The
CONFIGURATION menu screen is displayed.
3. Press
the
Next
key to select CONTROL PANEL.
4. Press
the
Enter
key to select CONTROL PANEL. The
CONTROL PANEL screen is displayed. Below is an example of
the CONTROL PANEL screen.
CONTROL PANEL
BEEPER
:
TEXT:
DEFAULT MODE:
ENABLED
NORMAL
COPY
Control Panel Screen
5. Press
the
Previous
or Next key to highlight BEEPER, TEXT
MODE or DEFAULT MODE.
6. Press
the
Enter
key to select the highlighted option.
7. Press
the
Previous
or Next key to highlight the desired setting
for the option.
The choices for BEEPER are ENABLED or DISABLED. ENABLED is
the default setting. The Initialization Beep and the Fault Beep are not
affected by this setting and cannot be turned off.
The choices for TEXT are NORMAL or BOLD. NORMAL is the default
setting.
The choices for DEFAULT MODE are COPY or SCAN. COPY is the
default setting.
NOTE: The DEFAULT MODE setting will not be displayed unless the
Scan-to-Net feature is enabled. Press the Enter key to select the
highlighted setting.
8. Repeat steps 5 through 8 if you wish to change another setting.
9. Press
the
Exit
key to return to the CONFIGURATION menu
screen.
CONTROL PANEL