Xerox 721 User Manual - Getting to Know The Wide
XEROX WIDE FORMAT COPY SYSTEM
Getting to know the WIDE FORMAT COPY SYSTEM
• 1
Getting to know the WIDE
FORMAT COPY SYSTEM
This manual contains operating instructions for the user and the system
administrator for the XEROX WIDE FORMAT COPY SYSTEM 510
Series, 721P, 6030/6050/6050A, and 6204 with version 12.5 FreeFlow
Accxes firmware loaded into the Controller.
NOTE: For the 6030/6050/6050A printers that want to use the FreeFlow
Accxes firmware features, the printer also needs to be connected to a
separate PUN, YKE, or FRX controller, referred to as the FreeFlow
Accxes Print Server. The Web Print Management Tool software will be
loaded on the print server.
Your XEROX WIDE FORMAT COPY SYSTEM is an integrated solution
for electronically scanning and then printing good quality copies of the
images for engineering or architectural size documents. The WIDE
FORMAT COPY SYSTEM consists of the WIDE FORMAT SCAN
SYSTEM and Control Panel for capturing images, the FreeFlow Accxes
Controller for processing these images, and XEROX WIDE FORMAT
COPY SYSTEM Printers 510 Series, 721P, 6030/6050/6050A, or 6204.
The WIDE FORMAT COPY SYSTEM has two modes of operation -
COPY and SCAN.
In the COPY mode, documents are scanned, temporarily stored
in memory or on the FreeFlow Accxes Controller hard disk, and
then sent to the local Printer as soon as the Printer is available.
In the SCAN mode:
Scan-to-Net
: Documents are scanned and then stored on the
FreeFlow Accxes Controller hard disk for later retrieval over a
network by a remote device.
Scan-to-FTP
: Scanned images can be transferred to 4 remote
FTP destinations. The scanned images are not stored on the
FreeFlow Accxes Controller’s hard drive. The FTP feature is
located on the Sample Mode screen.
The WIDE FORMAT COPY SYSTEM allows concurrent printing,
copying, and scanning to the network, so there is no need to wait for the
Printer to finish before scanning the next document.