Xerox 721 User Manual - Scanning When Using A Folder

XEROX WIDE FORMAT COPY SYSTEM 

Scanning when using a Folder  

• 57 

Scanning when using a Folder 

Scanning when using a Folder 

When using a Folder, the document must be inserted in the correct 

orientation in order to have the title block visible after the copy is folded. 

Refer to the Finisher key information in the Special feature keys section 

of this manual for additional information to set up the desired fold and 

other Finisher options. Documents larger than 80 inches (2.1M) can only 

be partially folded. 

When using the Reduce/Enlarge feature and a Folder, you must orient 

and insert the document title block in the same orientation as the 

resulting enlargement or reduction copy size.  In addition, the 

recommended media should be used. 

For example: the job requires that an A (A4) document be enlarged to a 

C (A2) document.  To have the title block visible after folding, the A (A4) 

document must be inserted as if it were a C (A2) document.   

You may want to refer to CUSTOM R/E PRESETS in the Main Menu, 

COPY OPTIONS section, and set up the REDUCTION/ENLARGEMENT 

default to show the standard reduction and enlargement.  Set the 

reduction /enlargement to display A to C (A4 to A2) above the keys. 

To ensure that the selected fold is made correctly, it is critical that the 

document be centered on the Scan System Document Feed Tray when 

scanning. 

For additional folding and title block positioning information, refer to the 

Folder Operator Manual or the Folding Supplement CD.