Xerox 721 User Manual - page 32
18
• Getting to know the WIDE FORMAT COPY SYSTEM
XEROX WIDE FORMAT COPY SYSTEM
The Reduce/Enlarge area of the Scan System Control Panel allows you
to select one of three reduction/enlargement modes - Auto, Manual, and
Preset
. The illustration below depicts the Reduce/Enlarge portion of the
Control Panel.
NOTE: Reduce/Enlarge can only be selected in Copy mode.
Reduce/Enlarge Area
Auto
Auto
automatically adjusts the reduction/enlargement to fit the size of
media selected. To select the Auto mode, press the key beneath
Reduce/Enlarge
until the Auto indicator lamp illuminates.
NOTE: The size of the output media must be known in advance for this
feature to operate. Therefore, Auto is not a valid selection if both the
Synchro cut option and the Sheet and Auto media source options are
selected. If you select this combination, an INVALID AUTO
COMBINATION status is displayed.
Manual
Manual
allows you to reduce the image captured by the Scan System to
as little as 25%, or as much as 400%, of the original size before the copy
is printed.
To select the Manual mode:
1. Press the key beneath Reduce/Enlarge until the Manual
indicator lamp illuminates. The MANUAL
REDUCTION/ENLARGEMENT screen is displayed.
Reduce/Enlarge