Xerox 721 User Manual - page 122

108  

•  Main Menu 

XEROX WIDE FORMAT COPY SYSTEM 

•  AUTOWIDTH/AUTOCENTER - Enables the automatic 

centering of the image and automatic width detection. This 

selection is the default. In this mode the document will be 

prescanned. 

•  PRODUCTIVITY - This feature does not use 

AUTOCENTER, requiring the operator to manually align the 

document within the media guidelines on the Feed-in Tray. 

The width sensors eliminate the need for a prescan, thereby 

increasing the overall throughput of the system resulting in 

higher productivity. When this feature is used, the operator 

must select the media series, ANSI, ARCH, ISO A, ISO B 

JIS B and CUSTOM etc. since the number of sensors 

provided cannot monitor every media type.  

To use the MODE: PRODUCTIVITY: CUSTOM the custom 

sizes must be entered in the CUSTOM MEDIA FORMATS 

(Select the Menu key > CONFIGURATION>COPY 

OPTIONS). 

To set the Scanner Control features: 

1. Press 

the 

Menu

 key.  The MAIN MENU screen is displayed. 

2. Press 

the 

Enter

 key to select CONFIGURATION.  The 

CONFIGURATION menu screen is displayed. 

3. Press 

the 

Next

 key until SCANNER CONTROL is highlighted. 

4. Press 

the 

Enter

 key to select SCANNER CONTROL.  The 

SCANNER CONTROL screen is displayed. 

SCANNER CONTROL

DOCUMENT RETURN: 

 AUTOSCAN

MODE: 

FRONT

 AUTOWIDTH/AUTOCENTER 

9 

ScannerControl Screen 

5. Press 

the 

Previous

 or Next key to select the desired feature. 

6. Press 

the 

Enter

 key to confirm the choice. 

7. Press 

the 

Previous

 or Next key to select the desired setting. 

•  For AUTOSCAN, you can enable or disable the feature.  A 

checkmark in the box to the left of the feature indicates that 

the feature is enabled.  Enabled is the factory default setting 

for these features. 

•  For DOCUMENT RETURN, the selections are FRONT and 

REAR.  FRONT is the factory default setting. 

•  For MODE: use the Previous or Next keys to select the 

desired option then press the Enter key to confirm the 

choice. The options are MANUAL, AUTOWIDTH, 

AUTOWIDTH/AUTOCENTER, or PRODUCTIVITY. If 

PRODUCTIVITY is selected, then use the Previous or Next 

key to select the ANSI, ARCH, ISO A, ISO B, JISB, or 

CUSTOM setting.