Xerox 721 User Manual - page 125
XEROX WIDE FORMAT COPY SYSTEM
Main Menu
• 111
CONTROL PANEL
MODEL: 1
FIRMWARE: 1.1.0
Control Panel Screen
PRINTER
MODEL: XEROX XXXX WIDE FORMAT
FIRMWARE: XXX
Printer Screen
NOTE: The XXXX represents the Printer name.
FINISHER
MODEL:
NONE
Finisher Screen
NOTE: This screen identifies the Finisher, if any. If there is no finisher,
the MODEL is displayed as NONE. If a Folder is connected, the
FINISHER screen displays the configuration of the connected Folder.
7. Press
the
Exit
key to return to the SYSTEM DESCRIPTION
screen.
The RECENT FAULT LIST option of the SYSTEM INFORMATION menu
displays the most recent faults related to the Scan System. Fault
messages are stored in the Controller. Each fault message contains a
fault code and a digital time stamp. When you call for service, the
service center may ask you for this information.
To display the recent fault list:
1. Press
the
Menu
key. The MAIN MENU screen is displayed.
2. Press
the
Next
key to highlight SYSTEM INFORMATION.
3. Press
the
Enter
key to select SYSTEM INFORMATION. The
SYSTEM INFORMATION menu screen is displayed.
RECENT FAULT LIST