Xerox 721 User Manual - page 66

52  

• Making copies 

 XEROX WIDE FORMAT COPY SYSTEM  

Some documents will always exit to the rear at the completion of the 

scan regardless of the DOCUMENT RETURN setting. These documents 

include: 

• Thick 

documents 

•  Documents longer than 5 feet (1.52 meters) 

•  Documents over 36 inches (914 mm) in width  

MODE: 

MANUAL - The user must enter the width of the document manually, and 

very carefully center the document when inserting it into the Scan 

System. The document is prescanned in this mode. 

AUTOWIDTH - This is the default setting.  When AUTOWIDTH is 

selected, the Scan System automatically detects the width of the 

document. 

AUTOWIDTH/AUTOCENTER - The document is prescanned in this 

mode.When AUTOWIDTH/AUTOCENTER is enabled, the Scan System 

automatically centers the image and automatically detects the document 

width.  

PRODUCTIVITY – ANSI - PRODUCTIVITY is only available on Scan 

Systems with FreeFlow Accxes firmware 10.0 or higher, Scan System 

firmware 3.2.6 or higher,

and the Productivity Document Feed Tray that 

includes discrete width sensors. PRODUCTIVITY – ANSI is the default. 

Other media type selections include ARCH, ISO A, ISO B, JIS B and 

CUSTOM. These selections must be made so that the sensors detect 

the correct width. This feature eliminates the prescan width 

measurement, which increases document throughput speed resulting in 

greater productivity. CUSTOM requires standard media sizes to be 

entered in CUSTOM MEDIA FORMATS.  

AUTOWIDTH and AUTOWITH/AUTOCENTER are not available in this 

mode.  

Select the Menu key > CONFIGURATION>SCAN SYSTEM CONTROL, 

MODE: for additional information.