Xerox 721 User Manual - page 82
68
• Special features keys
XEROX WIDE FORMAT COPY SYSTEM
RECALL TEMPLATE
TEMPLATES IN USE:
1
2
3
4
5
ENTER TEMPLATE NUMBER
0
Recall Template Screen
5. Use the numeric keypad to enter the location of the template to
be recalled.
6. Press
the
Enter
key to confirm your choice. A recall
confirmation screen is displayed. The associated template is
recalled and the Scan System Control Panel settings are
configured accordingly.
JOB PARAMETERS RECALLED
PRESS ENTER TO CONTINUE
Job Parameters Recalled Screen
You can now use the parameter settings as they have been recalled, or
you may change some of them.
NOTE: If you change any of the Image Quality settings (i.e., document
type, background suppression, or copy contrast) or if you want to invert
the image, an error message will advise you to rescan the image. You
must rescan the image to change any image quality settings for a job
that has been recalled.
7. Press
the
Enter
key to return to the READY screen.
Use the DELETE TEMPLATE option to delete previously saved
templates. Doing so leaves the template location blank and available to
use again. Once a template has been deleted, it cannot be recalled.
To delete a saved template:
1. Press
the
Store/Recall
key. The STORE/RECALL menu screen
is displayed.
2. Press
the
Next
key to highlight JOB TEMPLATES.
3. Press
the
Enter
key to select JOB TEMPLATES. The JOB
TEMPLATES menu screen is displayed.
4. Press
the
Next
key until DELETE TEMPLATE is highlighted.
5. Press
the
Enter
key to select DELETE TEMPLATE. The
DELETE TEMPLATE screen is displayed. This screen indicates
Deleting Job Templates