Xerox 721 User Manual - page 159
XEROX WIDE FORMAT COPY SYSTEM
Cleaning and maintenance - Scan System
• 145
Cleaning the Calibration Strip
Perform the following steps monthly:
1. Press
the
Menu
key, then scroll to the Diagnostic and press the
Enter
key.
• Scroll to CLEAN CAL ZONE and press the Enter key.
• Press
the
Enter
key to select CLEANING POSITION.
NOTE: The Top Cover must be closed while running this test.
2. Raise the Top Cover.
3. Inspect the Calibration Strip.
4. Place a small amount of platen glass cleaning fluid (Xerox
43P81) on a clean, lint-free towel (600S4372) and clean the
Calibration Strip.
5. Lower the Top Cover.
6. Press
the Enter key to select HOME POSITION.
7. Press
the
Exit
key to exit the CLEAN CAL ZONE.
8. Press
the
Menu
key to return to the READY screen. The
Calibration Strip automatically returns to its home position.