Baldor NXE100-1608Dx Installation manual - 4.1 Introduction
www.baldormotion.com
Input / Output 4-1
MN1941
4.1 Introduction
This section describes the input and output capabilities of the NextMove e100.
The following conventions will be used to refer to the inputs and outputs:
I/O
Input / Output
. . . . . . . . . . . . . .
DIN
Digital Input
. . . . . . . . . . . . .
DOUT
Digital Output
. . . . . . . . . . .
AIN
Analog Input
. . . . . . . . . . . . .
AOUT
Analog Output
. . . . . . . . . . .
Common electrical connections use the following abbreviations:
AGND
Analog ground. Used by the analog input and output circuits.
. . . . . . . . . .
USR V+
User power supply V+. Provides power to the digital outputs.
. . . . . . . . .
USR GND
User power supply ground. Return connection for the user power supply.
. . . . . . .
CREFx
Common reference. The common connection for a group of digital inputs.
. . . . . . . . . .
DGND
Digital ground. Used by the stepper control outputs.
. . . . . . . . . .
4
Input / Output
4