Baldor NXE100-1608Dx Installation manual - page 64
www.baldormotion.com
5-14 Operation
MN1941
5.5.2 Configuring remote axes
When configuring a remote axis on the NextMove e100, there is no requirement to determine the
type of axis, for example servo or stepper. Basic configuration requires only a node ID and an
axis number to be selected. In Mint WorkBench, the System Configuration Wizard is used to
assign the node IDs and axis numbers.
1. In the Toolbox,
click
the System
Configuration icon.
2. On the EPL Devices page, click
Add Device... .
3. In the central drop down box, select the
type of EPL device,
for example
MicroFlex e100.
At the top of the window, select the node ID
of the EPL device. The node ID allows the
NextMove e100 to uniquely identify the
EPL device on the network.
Click OK.
The Resource Mapping window is displayed.
4. Click on the Axis 0 entry and click Map...
The Axis resource mapping window is
displayed.