Jeep 2016 CHEROKEE Operating Information Manual - page 108
Adaptive Cruise Control (ACC)
Operation
The speed control buttons (located on the right
side of the steering wheel) operates the ACC
system.
NOTE:
Any chassis/suspension or tire size modifi-
cations to the vehicle will effect the perfor-
mance of the Adaptive Cruise Control and
Forward Collision Warning System.
Activating Adaptive Cruise Control
(ACC)
You can only engage ACC if the vehicle speed
is above 0 mph (0 km/h).
The minimum Set Speed for the ACC system is
20 mph (32 km/h).
When the system is turned on and in the
READY state, the Driver Information Display
(DID) displays “ACC Ready.”
When the system is OFF, the DID displays
“Adaptive Cruise Control (ACC) Off.”
NOTE:
You cannot engage ACC under the following
conditions:
•
When in Four-Wheel Drive Low.
•
When you apply the brakes.
•
When the parking brake is set.
•
When the automatic transmission is in
PARK, REVERSE or NEUTRAL.
•
When the Vehicle speed is outside of the
speed range.
•
When the brakes are overheated.
•
When the driver door is open.
•
When the driver seat belt is unbuckled.
To Activate/Deactivate
Push and release the Adaptive Cruise Control
(ACC) ON/OFF button. The ACC menu in the
DID displays “ACC Ready.”
Adaptive Cruise Control Buttons
1 — NORMAL (FIXED SPEED) CRUISE
CONTROL ON/OFF
2 — SET+/ACCEL
3 — RESUME
4 — SET-/DECEL
5 — DISTANCE SETTING — INCREASE
6 — ADAPTIVE CRUISE CONTROL (ACC)
ON/OFF
7 — DISTANCE SETTING — DECREASE
8 — CANCEL
Adaptive Cruise Control Ready
104