Jeep 2016 CHEROKEE Operating Information Manual - page 197
Using The Touchscreen Radio
1.
RSE Channel 1 Mode
Indicates
the
current
source
for
Screen
1/Channel 1; This button will be highlighted
when it is the active Screen/Channel being
controlled by the front user. If this button is not
highlighted select button to access controls for
Screen 1/Channel 1 source.
2.
RSE Power
Press to turn RSE On/Off.
3.
RSE Mute
Mute rear headphones for the current ignition
cycle. Pressing mute again will unmute rear
headphones.
4.
RSE Remote Control Lock Out
Press to enable/disable Remote Control func-
tions.
5.
RSE Channel 2 Mode
Indicates the current source for Screen 2/
Channel 2; This button will be highlighted when it
is the active Screen/Channel being controlled by
the front user. If this button is not highlighted
select button to access controls for Screen
2/Channel 2 source.
6.
Radio Full Screen Mode
Select this button to change to Full Screen
Mode.
7.
Cabin Audio Mode
Select this button to change the cabin audio to
the rear entertainment source currently shown
on the rear media control screen.
8.
RSE Mode
Select this button to change source for the
active (highlighted) rear Screen/Channel on the
rear media control screen.
•
Press the Media button on the touchscreen,
then press the Rear Media button on the
touchscreen.
•
Press the OK button on the touchscreen to
begin playing the Blu-ray™ Disc on the
touchscreen radio.
Using The Remote Control
•
Select an audio channel (Rear 1 for driver’s
side rear screen and Rear 2 for passenger’s
side rear screen), then press the source key
and using the up and down arrows, highlight
disc from the menu and press the OK button.
•
Press the popup/menu key to navigate the
disc menu and options.
Rear Media Control Screen
193