Jeep 2016 CHEROKEE Operating Information Manual - page 189
Lights
After pressing the “Lights” button on the touch-
screen the following settings will be available.
•
Headlights Off Delay
When this feature is selected, it allows the
adjustment of the amount of time the headlights
remain on after the engine is shut off. To change
the Headlights Off Delay setting, press the
“Headlights Off Delay” button on the touch-
screen, and choose either “0 sec,” “30 sec,” “60
sec” or “90 seconds.” A check-mark appears
next to setting indicating that the setting has
been selected. Press the back arrow button on
the touchscreen to return to the previous menu.
•
Headlight Illumination On Approach
When this feature is selected, the headlights will
activate and remain on for 0, 30, 60, or 90
seconds when the doors are unlocked with the
Remote Keyless Entry (RKE) transmitter. To
change the Illuminated Approach status, press
the “+” or “–” button on the touchscreen to select
your desired time interval. Press the back arrow
button on the touchscreen to return to the
previous menu.
•
Headlights With Wipers — If Equipped
When this feature is selected, and the headlight
switch is in the AUTO position, the headlights
will turn on approximately 10 seconds after the
wipers are turned on. The headlights will also
turn off when the wipers are turned off if they
were turned on by this feature. To make your
selection, press the “Headlights With Wipers”
button on the touchscreen, until a check-mark
appears next to setting, indicating that the set-
ting has been selected. Press the back arrow
button on the touchscreen to return to the
previous menu.
•
Auto High Beams — If Equipped
When this feature is selected, the high beam
headlights will activate/deactivate automatically
under certain conditions. To make your selec-
tion, press the “Auto High Beams” button on the
touchscreen, until a check-mark appears next
to setting, indicating that the setting has been
selected. Press the back arrow button on the
touchscreen to return to the previous menu.
Refer to “Lights/Auto High Beams — If
Equipped” in “Understanding The Features Of
Your Vehicle” for further information.
•
Daytime Running Lights — If Equipped
When this feature is selected, the headlights will
turn on whenever the engine is running. To
make your selection, press the “Daytime Run-
ning Lights” button on the touchscreen, until a
check-mark appears next to setting, indicating
that the setting has been selected. Press the
back arrow button on the touchscreen to return
to the previous menu.
•
Adaptive Front Lighting
When this feature is selected, the headlights will
turn relative to a change in the direction of the
steering wheel. To make your selection, press
the “Adaptive Front Lighting” button on the
touchscreen, until a check-mark appears next
to setting, indicating that the setting has been
selected. Press the back arrow button on the
touchscreen to return to the previous menu.
•
Headlight Dip
Select this feature when driving on the opposite
side of road to lower headlights. To make your
selection, press the “Headlight Dip” button on
the touchscreen, until a check-mark appears
next to setting, indicating that the setting has
185