Jeep 2016 CHEROKEE Operating Information Manual - page 125
WARNING ALERTS
Rear Distance
(in/cm)
Greater than
79 in (200 cm)
79-39 in
(200-100 cm)
39-25 in
(100-65 cm)
25-12 in
(65-30 cm)
Less than
12 in (30 cm)
Audible Alert
Chime
None
Single 1/2
Second Tone
Slow
Fast
Continuous
Arc
None
4th Solid
3rd
Solid
2nd
Flashing
1st
Flashing
Radio Volume Re-
duced
No
Yes
Yes
Yes
Yes
NOTE:
ParkSense® will reduce the volume of the
radio, if on, when the system is sounding an
audio tone.
Adjustable Chime Volume Settings
Rear chime volume settings can be selected
from the Customer-Programmable Features
section of the Uconnect® System, refer to
“Uconnect Settings” in “Understanding Your In-
strument Panel” for further information.
The chime volume settings include LOW, ME-
DIUM, and HIGH. The factory default volume
setting is MEDIUM.
ParkSense® will retain its last known configu-
ration state through ignition cycles.
Enabling And Disabling ParkSense®
ParkSense® can be enabled and disabled with
the ParkSense® switch.
When the ParkSense® switch is
pressed to disable the system, the
instrument cluster will display the
“PARKSENSE OFF” message for
approximately five seconds. Refer
to “Driver Information Display (DID)” in “Under-
standing Your Instrument Panel” for further in-
formation. When the shift lever/gear selector is
moved to REVERSE and the system is dis-
abled, the DID will display the “PARKSENSE
OFF” message for as long as the vehicle is in
REVERSE.
The ParkSense® switch LED will be ON when
ParkSense® is disabled or requires service.
The ParkSense® switch LED will be OFF when
the system is enabled. If the ParkSense®
switch is pressed, and the system requires
service, the ParkSense® switch LED will blink
momentarily, and then the LED will be ON.
121