Jeep 2016 CHEROKEE Operating Information Manual - page 297
Pin Number
Function
Wire Color
10
Power Supply Controlled by Ignition Switch (+12V)
Yellow
11
a
Return for Contact (Pin) 10
Yellow/Brown
12
Reserve for Future Allocation
–
13
a
Return for Contact (Pin) 9
Red/Brown
NOTE:
The allocation pin 12 has been changed from “Coding for coupled Trailer” to “Reserve for Future Allocation.”
a
The three return circuits shall not be connected electrically in the trailer.
b
The rear position registration plate illumination device shall be connected such that no light of the device has a common connection with both
pins 5 and 7.
Towing Tips
Before setting out on a trip, practice turning,
stopping and backing the trailer in an area away
from heavy traffic.
Automatic Transmission
The DRIVE range can be selected when towing.
The transmission controls include a drive strat-
egy to avoid frequent shifting when towing.
However, if frequent shifting does occur while in
DRIVE, you can use the Paddle Shift switches
to manually select a lower gear.
NOTE:
Using a lower gear while operating the ve-
hicle under heavy loading conditions, will
improve performance and extend transmis-
sion life by reducing excessive shifting and
heat buildup. This action will also provide
better engine braking.
Paddle Shift Mode
•
When using the Paddle Shift switches, select
the highest gear that allows for adequate
performance and avoids frequent downshifts.
For example, choose “5” if the desired speed
can be maintained. Choose “4” or “3” if
needed to maintain the desired speed.
•
To prevent excess heat generation, avoid
continuous driving at high RPM. Reduce
vehicle speed as necessary to avoid ex-
tended driving at high RPM. Return to a
higher gear or vehicle speed when grade and
road conditions allow.
293