Jeep 2016 CHEROKEE Operating Information Manual - page 186
has been selected. Press the back arrow button
on the touchscreen to return to the previous
menu.
•
Set Time Hours
When in this display, you may adjust the hours.
The Sync with GPS Time button on the touch-
screen must be unchecked. To make your se-
lection press the “+” or “–” buttons on the
touchscreen to adjust the hours up or down.
Press the back arrow button on the touchscreen
to return to the previous menu or press the X
button on the touchscreen to close out of the
settings screen.
•
Set Time Minutes
When in this display, you may adjust the min-
utes. The Sync with GPS Time button on the
touchscreen must be unchecked. To make your
selection press the “+” or “–” buttons on the
touchscreen to adjust the minutes up or down.
Press the back arrow button on the touchscreen
to return to the previous menu or press the X
button on the touchscreen to close out of the
settings screen.
•
Time Format
When in this display, you may select the time
format display setting. Press the “Time Format”
button on the touchscreen until a check-mark
appears next to the 12hrs or 24hrs setting,
showing that setting has been selected. Press
the back arrow button on the touchscreen to
return to the previous menu.
Safety & Driving Assistance
After pressing the “Safety & Driving Assistance”
button on the touchscreen the following settings
will be available:
•
Forward Collision Warning — If
Equipped
The Front Collision Warning (FCW) feature pro-
vides an audible and/or visual warning to poten-
tial forward collisions. The feature can be can
be set to Far, or set to Near. The default status
of FCW is the Far setting. This means the
system will warn you of a possible collision with
the vehicle in front of you when you are farther
away. This gives you the most reaction time. To
change the setting for more dynamic driving,
select the Near setting. This warns you of a
possible collision when you are much closer to
the vehicle in front of you. To change the FCW
status, press and release the “Near” or “Far”
button. Then press the back arrow button on the
touchscreen.
For further information, refer to “Adaptive
Cruise Control (ACC)” in “Understanding The
Features Of Your Vehicle”.
•
Forward Collision Warning (FCW) — Ac-
tive Braking
The FCW system includes Advanced Brake
Assist (ABA). When this feature is selected, the
ABA applies additional brake pressure when the
driver requests insufficient brake pressure to
avoid a potential frontal collision. The ABA
system becomes active at 5 mph (8 km/h). To
make your selection, press the “Forward Colli-
sion Warning (FCW) with Mitigation - Active
Braking” button on the touchscreen, until a
check-mark appears next to setting, indicating
that the setting had been selected. Press the
back arrow button on the touchscreen to return
to the previous menu. For further information,
182