Jeep 2016 CHEROKEE Operating Information Manual - page 164
•
UP Arrow Button
Push and release the UP arrow
button to scroll upward through the
main menu and submenus.
•
DOWN Arrow Button
Push and release the DOWN arrow
button to scroll downward through
the main menu and submenus.
•
RIGHT Arrow Button
Push and release the RIGHT arrow
button to access the information
screens or submenu screens of a
main menu item.
•
BACK/LEFT Arrow Button
Push and release the LEFT arrow
button to access the information
screens or submenu screens of a
main menu item.
•
OK Button
The OK button may be used for the following:
Selection
Reset (hold)
Clearing (hold)
DID Displays
The DID displays are located in the center
portion of the cluster and consist of multiple
sections:
1. Main Screen — The inner ring of the display
will illuminate in grey under normal condi-
tions, yellow for non critical warnings, red for
critical warnings and white for on demand
information.
2. Audio Information and Sub-menu Informa-
tion — Whenever there are submenus avail-
able, the position within the submenus is
shown here.
3. Reconfigurable Telltales/Information
4. Telltales/Indicators
5. Shift Lever Status (PRNDL)
6. Selectable Information (Compass, Temp,
Range to Empty, Trip A, Trip B, Average Fuel
Economy, Current Fuel Economy)
7. Air Suspension Status — If Equipped
8. 4WD Status — Status
9. Selectable Gauge 1
The main display area will normally display the
main menu or the screens of a selected feature
of the main menu. The main display area also
displays “pop up” messages that consist of
approximately 60 possible warning or informa-
tion messages. These pop up messages fall
into several categories:
•
Five Second Stored Messages
When the appropriate conditions occur, this
type of message takes control of the main
display area for five seconds and then returns to
the previous screen. Most of the messages of
this type are then stored (as long as the condi-
tion that activated it remains active) and can be
reviewed from the “Messages” main menu item.
160