Jeep 2016 CHEROKEE Operating Information Manual - page 90
Reclining Rear Seat
To recline the seatback, lift the lever located on
the outboard side of the seat, lean back and
release the lever at the desired position. To
return the seatback, lift the lever, lean forward
and release the lever.
WARNING!
Do not ride with the seatback reclined so that
the shoulder belt is no longer resting against
your chest. In a collision you could slide
under the seat belt, which could result in
serious injury or death.
DRIVER MEMORY SEAT — IF
EQUIPPED
This feature allows the driver to store up to two
different memory profiles for easy recall through
a memory switch. Each memory profile contains
desired position settings for the driver seat, side
mirrors, and power tilt and telescopic steering
column (if equipped) and a set of desired radio
station presets. Your Remote Keyless Entry
(RKE) transmitter can also be programmed to
recall the same positions when the UNLOCK
button is pressed.
NOTE:
Your vehicle is equipped with two RKE
transmitters, one RKE transmitter can be
linked to memory position 1 and the other
transmitter can be linked to memory posi-
tion 2.
The memory seat switch is located on the
driver’s door trim panel. The switch consists of
three buttons:
•
The (S) button, which is used to activate the
memory save function.
•
The (1) and (2) buttons which are used to
recall either of two pre-programmed memory
profiles.
Rear Seat Release
Memory Seat Switch
86