Jeep 2016 CHEROKEE Operating Information Manual - page 183
select “On” or “Off” followed by pressing the
back arrow button on the touchscreen.
•
Transport Mode
When this feature is selected the air suspension
system is disabled to assist with flat bed towing.
To make your selection, press the “Transport
Mode” button on the touchscreen, select “On” or
“Off” followed by pressing the back arrow button
on the touchscreen.
•
Wheel Alignment Mode
This feature prevents auto leveling of the air
suspension while performing a wheel alignment
service. Before performing a wheel alignment
this mode must be enabled. Refer to your
authorized dealer for further information.
Radio Setup — If Equipped
After pressing the “Radio Setup” button on the
touchscreen the following settings will be avail-
able.
•
Regional
When this feature is selected it forces regional
service-following enabling automatic switching
to network stations. To change the Regional
setting press the “Off” or “On” button on the
touchscreen. Then press the back arrow button
on the touchscreen.
Restore Settings
After pressing the “Restore Settings” button on
the touchscreen the following settings will be
available:
•
Restore Settings
When this feature is selected it will reset the
Display, Clock, Audio, and Radio Settings to
their default settings. To restore the settings to
their default setting, press the Restore Settings
button. A pop-up will appear asking
"
Are you
sure you want to reset your settings to default?”
select “Yes” to restore, or “Cancel” to exit. Once
the settings are restored, a pop up appears
stating
"
settings reset to default.
"
Press the
okay button on the touchscreen to exit.
Clear Personal Data
After pressing the “Clear Personal Data Set-
tings” button on the touchscreen the following
settings will be available:
•
Clear Personal Data
When this feature is selected it will remove
personal data including Bluetooth® devices and
presets. To remove personal information, press
the “Clear Personal Data” button and a pop-up
will appear asking
"
Are you sure you want to
clear all personal data?” select “OK” to Clear, or
“Cancel” to exit. Once the data has been
cleared, a pop up appears stating
"
Personal
data cleared”. Press the back arrow button on
the touchscreen to return to the previous menu.
Customer Programmable Features
— Uconnect® 8.4 Settings
Press the “Settings” button on the touchscreen
to display the menu setting screen. In this mode
the Uconnect® system allows you to access
programmable features that may be equipped
such as Display, Clock, Safety/Assistance,
Lights, Doors & Locks, Auto-On Comfort, En-
gine Off Operation, Audio, Phone/Bluetooth,
179