Jeep 2016 CHEROKEE Operating Information Manual - page 175
equipped such as Display, Clock, Safety/
Assistance, Lights, Doors & Locks, Auto-On
Comfort, Engine Off Options, Compass Set-
tings, Audio, Phone/Bluetooth®, Suspension,
Radio Setup, Restore Settings and Clear Per-
sonal Data.
NOTE:
Only one touchscreen area may be selected
at a time.
When making a selection, press the button on
the touchscreen to enter the desired mode.
Once in the desired mode, press and release
the preferred setting and make your selection.
Once the setting is complete, either press the
Back Arrow button on the touchscreen or the
Back button on the faceplate to return to the
previous menu or press the “X” button on the
touchscreen to close out of the settings screen.
Pressing the Up or Down Arrow buttons on the
right side of the screen will allow you to toggle
up or down through the available settings.
NOTE:
All settings should be changed with the
ignition in the “Run” position.
Display
After pressing the “Display” button on the touch-
screen the following settings will be available.
•
Display Mode
When in this display you may select the “Auto”
or “Manual” display settings. To change Mode
status, press and release the “Auto” or “Manual”
button on the touchscreen. Then press the
arrow back button on the touchscreen.
NOTE:
When Day or Night is selected for the Dis-
play Mode, the usage of the Parade Mode
feature will cause the radio to activate the
Display Brightness Day control even though
the headlights are on.
•
Display Brightness With Headlights ON
When in this display, you may select the overall
screen brightness with the headlights on. Adjust
the brightness with the “+” and “–” setting but-
tons on the touchscreen or by selecting any
point on the scale between the “+” and “–”
buttons on the touchscreen. Then press the
arrow back button on the touchscreen.
NOTE:
To make changes to the
ⴖ
Display Brightness
with Headlights ON
ⴖ
setting, the headlights
must be on and the interior dimmer switch
must not be in the
ⴖ
party
ⴖ
or
ⴖ
parade
ⴖ
posi-
tions.
•
Display Brightness With Headlights OFF
When in this display, you may select the overall
screen brightness with the headlights off. Adjust
the brightness with the “+” and “–” setting but-
tons on the touchscreen or by selecting any
point on the scale between the “+” and “–”
buttons on the touchscreen. Then press the
arrow back button on the touchscreen.
NOTE:
To make changes to the
ⴖ
Display Brightness
with Headlights OFF
ⴖ
setting, the headlights
must be off and the interior dimmer switch
must not be in the
ⴖ
party
ⴖ
or
ⴖ
parade
ⴖ
posi-
tions.
171