Jeep 2016 CHEROKEE Operating Information Manual - page 177
status, press and release the “Sound Only” or
“Sounds and Display” button. Then press the
back arrow button on the touchscreen. Refer to
“ParkSense®” in “Understanding The Features
Of Your Vehicle” for system function and oper-
ating information.
•
Tilt Mirrors In Reverse
When this feature is selected, the exterior
sideview mirrors will tilt downward when the
ignition is in the RUN position and the transmis-
sion shift lever/gear selector is in the REVERSE
position. The mirrors will move back to their
previous position when the transmission is
shifted out of REVERSE. To make your selec-
tion, press the “Tilt Mirrors In Reverse” button
on the touchscreen and make your selection.
Press the back arrow button on the touchscreen
to return to the previous menu.
•
ParkView® Backup Camera Active
Guidelines
Your vehicle may be equipped with the
ParkView® Rear Back Up Camera Active
Guidelines that allows you to see active guide-
lines over the ParkView Back up camera display
whenever the shift lever/gear selector is put into
REVERSE. The image will be displayed on the
radio touchscreen display along with a caution
note to “check entire surroundings” across the
top of the screen. After five seconds, this note
will disappear. To make your selection, press
the “ParkView® Backup Camera Active Guide-
lines” button on the touchscreen and make your
selection. Press arrow button on the touch-
screen to return to the previous menu.
•
ParkView® Backup Camera Delay
When the vehicle is shifted out of REVERSE
(with camera delay turned OFF), the rear cam-
era mode is exited and the navigation or audio
screen appears again. When the vehicle is
shifted out of REVERSE (with camera delay
turned ON), the rear view image with dynamic
grid lines will be displayed for up to 10 seconds
after shifting out of “REVERSE” unless the
forward
vehicle
speed
exceeds
8
mph
(12 km/h), the transmission is shifted into PARK
or the ignition is switched to the OFF position.
To set the ParkView® Backup Camera Delay
press the “MORE” button on the faceplate, the
“settings” button on the touchscreen, then the
“Safety & Driving Assistance” button on the
touchscreen. Press the “Parkview Backup cam-
era Delay” button on the touchscreen to turn the
ParkView® Delay ON or OFF.
•
Rain Sensing Auto Wipers
When this feature is selected, the system will
automatically activate the windshield wipers if it
senses moisture on the windshield. To make
your selection, press the “Rain Sensing” button
on the touchscreen and make your selection.
Press the back arrow button on the touchscreen
to return to the previous menu.
•
Hill Start Assist — If Equipped
When this feature is selected, the Hill Start
Assist (HSA) system is active. Refer to “Elec-
tronic Brake Control System” in “Starting And
Operating” for system function and operating
information. To make your selection, press the
“Hill Start Assist” button on the touchscreen and
make your selection. Press the back arrow
button on the touchscreen to return to the
previous menu.
173