Jeep 2016 CHEROKEE Operating Information Manual - page 360
Other manuals for 2016 CHEROKEE:
Owner's Manual, User Manual, User Manual, Owner's Manual, Owner's Manual, Owner's Manual, Owner's Manual
of
792
5. Pull the bulb to remove it from the socket.
6. Replace the bulb, reinstall the socket, and
reattach the lamp assembly.
Rear Liftgate Mounted Tail Lamp
1. Raise the liftgate.
2. Use a fiber stick or flat blade screw driver to
pry the lower trim from the liftgate.
3. Continue removing the trim.
4. Disconnect the two trim panel lights.
5. Tail lamps are now visible. Rotate socket(s)
counter clockwise.
6. Remove/replace bulb(s).
7. Reinstall the socket(s)
8. Reverse process to reinstall the liftgate trim.
1 — Rear Stop Lamp Bulb Socket
2 — LED Tail Connector – Do Not Remove
3 — Rear Turn Signal Bulb Socket
Rear Liftgate Tail Lamps
1 — Auxiliary LED Tail Connector – Do Not Re-
move
2 — Backup Bulb Socket
356