NEC SA2500 User Manual - page 105
User Guide
102
www.nec-computers.com
RAID Configuration using the nVIDIA utility
To set up a bootable or non-bootable RAID array on your system, we recommend you:
1. Setup the array in the BIOS Setup.
See “NVRAID Configuration Submenu” on
page 223.
2. Configure the array in the NVIDIA RAID BIOS Setup. Press F10 when
prompted during boot to setup a RAID configuration using the onboard nVidia
chipset.
Refer to the NVIDIA RAID User’s Guide on the Expressbuilder CD for more
information.
3. Initialize the disk array using the Computer Management wizard under
Windows. Refer to the NVIDIA RAID User’s Guide on the Expressbuilder CD
for more information.
4. If necessary, fine-tune or change settings in the NVRAIDMAN utility under
Windows.
See “nVIDIA Media Shield RAID Management Utility” on
page 171.