NEC SA2500 User Manual - page 141
of
253
User Guide
138
www.nec-computers.com
6. When both metallic clips are released, lift the heatsink and set it aside.
7. Locate the processor socket.
8. Lift the lever on the socket and remove the processor.
Figure 26: Socket Lever
9. Remove the new processor from its antistatic package and place it on a
grounded, static-free surface or conductive foam pad.
10. Position the processor over the processor socket so that its pins align with the
socket holes.
Figure 27: Positioning the Processor
A: Notched corner
B: Triangle mark
Note: The CPU fits only in one correct orientation. Do NOT
force the CPU into the socket to prevent bending the pins and
damaging the CPU.