NEC SA2500 User Manual - page 231
User Guide
228
www.nec-computers.com
Power Management Features Menu
APM Configuration Submenu
Table 42: Power Management Features Menu
Feature
Choices or
Display Only
Description
Your Setting
ACPI APIC Support
Enabled
Disabled
Enables or disables the ACPI
feature on the operating
system.
ACPI Suspend Type
S1&S3
S1 (POS)
S3 (STR)
Allows you to select the
Advanced Configuration and
Power Interface (ACPI) state to
be used for system suspend.
Set to S1 for Windows 2003.
Set to S3 for Windows XP.
ACPI MCFG Table
Enabled
Disabled
This table creates the PCI
Express memory mapped
configuration space base
address configuration table.
When set to Enabled, the BIOS
will report the ACPI MCFG
table.
APM Configuration
Press Enter to open the
submenu.
Hardware Monitor
Press Enter to open the
submenu.
Table 43: APM Configuration Submenu
Feature
Choices or
Display Only
Description
Your Setting
Power Management
User Define
Min Saving
Max Saving
Allows you to set the automatic
power saving features
HDD Power Down
Disabled
1 Min to 15 Min
Shuts down any hard disk
drives in the system after the
specified period of inactivity.
Video Off Method
DPMS Support
Blank Screen
V/H Sync+Blank
Allows you to set the video-off
method.
The Display Power
Management System feature
allows to control the video
display card if it supports
DPMS.
Blank Screen only blanks the
screen. Use it for monitors
without power management.
Soft Off by PBTN
Instant Off
Delay 4 Sec
When set to Instant Off, the
system goes soft-off when you
press the power button for less
than 4 seconds.
When set to Delay 4 Sec, the
system power goes off when
you press the power button for
more than 4 seconds.