NEC SA2500 User Manual - Configuring Your System
User Guide
91
www.nec-computers.com
Configuring Your System
Configuration and setup utilities are used to change your system configuration.
■ RAID Configuration Utilities
Depending on your configuration (SATA, SCSI, both) and on your disk drive
controller, one or several RAID Configuration Software Utilities may be available
on your system. These software utilities may allow you to perform some of the
following actions: configure the RAID level, setup arrays, format the drives, etc.
■ BIOS Setup Utility
You can configure your system, as well as option boards you may add to your
system, using the BIOS Setup Utility. Several unique system parameters are
configured using the BIOS Setup, which is stored in the system FLASH memory.
If your system has been factory configured, the BIOS Setup Utility does not need
to be run unless you want to change the password or security features, add certain
types of option boards or devices, or upgrade your system board.
For more information about the BIOS Setup Utility, see
“BIOS Setup Utility” on
page 210
.