NEC SA2500 User Manual - Caution
User Guide
113
www.nec-computers.com
When an array has been created, the build operation starts.
Caution
Be sure to complete the Build process. Do not stop the process
by pressing Esc. The OS only detects arrays which have been
completely built, and their status set to "Optimal". In addition, no
OS can be installed in that array.
7. When the message [Build Completed] is displayed, press Esc to return to the
Main menu.
Note: On the Main menu, make sure that "Optimal" is
indicated for the status of the created array.
Creating RAID10 Array
1. Select [RAID-10] on [Select RAID Type] window and press Enter.
2. Use the cursor key to highlight the desired hard disk drives, press Space to
select them (an [X] mark is placed next to the selected hard disk drive) and
when the selection is finished, press Enter to validate it.