NEC SA2500 User Manual - Caution
of
253
User Guide
109
www.nec-computers.com
■
The hard disk drive which has been configured as an array
disk drive cannot be selected.
3. Select a RAID type in [Select RAID Type] window and press Enter.
Put a cursor to the selected item, another window opens indicating the
minimum and maximum number of disks to create an array and a message for
assigning a spare disk.
Note: To set the RAID level, see or
“Creating RAID1 Array”
on page 111
and
“Creating RAID0 Array” on page 109
.
Caution
After creating an array, set the boot priority for the created array
according to "Boot Priority".
Creating RAID0 Array
To create a RAID0 array:
1. Select [RAID-0] on the [Select RAID Type] window.