NEC SA2500 User Manual - Powering Off Your System
of
253
User Guide
88
www.nec-computers.com
Powering Off your System
When the system is powered on, pressing the power on/off switch on the front panel of
the system turns the power off.
To turn the system power off:
1. Shutdown the operating system (OS). In most cases, this will shut down the
system after a few seconds (the POWER lam turns off). This is called a
software power-off.
If necessary, press the POWER switch on the front of the computer chassis
again to power off the system. The POWER lamp turns off.
2. Power off the peripheral devices.
Note:
If the system power cord is connected to a power
control unit such as an UPS (Uninterruptible Power Supply),
refer to the UPS user's guide for proper power-off procedures.