NEC SA2500 User Manual - Cabling A Floppy Disk Drive
of
253
User Guide
154
www.nec-computers.com
Cabling a Floppy Disk Drive
All storage devices require power and data cable connections. Devices shipped with the
system are already connected.
The following procedure explains how to attach the cables to a floppy disk drive.
1. Connect the data cable connector (A) to the matching pins on the storage
device.
■ Take care to prevent bending drive connector pins.
■ Align the cable connector to the matching pins on the drive.
2. Locate an available power connector coming from the power supply.
3. Connect the appropriate power cable (C) to the power connector on the storage
device.
Figure 37: Cabling a Floppy Disk Drive
A - Data cable
B - Purple edge (Pin 1)
C - Power cable