NEC SA2500 User Manual - page 240
of
253
User Guide
237
www.nec-computers.com
Exit Menu
Select an option using the up or down arrow keys, then press
option.
You must select one of the items from the menu or menu bar to exit.
Table 54: Exit Menu
Choices
Description
Exit and Save Changes
Exits after writing all modified Setup item values to NVRAM.
F10 key can be used for this operation.
Exit and Discard Changes
Reads previous values of all Setup items from NVRAM.
Load Setup Defaults
Loads default values for all SETUP items.
F5 key can be used for this operation.
Discard Changes
Exits the utility without saving the changes.