NEC SA2500 User Manual - page 128
User Guide
125
www.nec-computers.com
Removing and Replacing the Front Panel
Removing the Front Panel
1. Remove the right side door. See
“Removing the Right Side Door” on page 122
2. Locate the front panel release latches (A) and gently pull them to release the
left side of the front panel.
Figure 17: Front Panel Release Latches
3. Once the left side is free, pivot the front panel toward you until it is totally
released.
Replacing the Front Panel
1. Insert the three tabs located on the right inside of the front panel into their
respective slots. You may have to slightly pivot the front panel to aid the
process.
2. Gently press on the left (outside) of the front panel until the four remaining tabs
are securely inserted into their slots.
3. Replace the right side door. See
“Replacing the Right Side Door” on page 124
.