NEC SA2500 User Manual - page 120
User Guide
117
www.nec-computers.com
2. Select [Add Spare] on the Option window as shown below.
3. Select the spare disk from the list of available disks, and press Enter.
4. Select [Yes] when prompted with the message [Are you sure?] and press
Enter.
Selecting [No] returns to the Main menu without assigning any spare disk.
5. On the Main menu, make sure that the type of the selected hard disk drive is set
to "Spare", and its status "Optimal".
To un-assign a spare disk, take the same steps from 1 to 4, using "Delete Spare"
instead of "Add Spare".
Boot Priority
To specify boot priority to an array:
1. Select the desired array, and press Enter.
2. Press B on the window showing the array details.
Note: Some characters may not be displayed correctly
when the console redirection is used. It is safe to bypass this
issue.