NEC SA2500 User Manual - page 149
of
253
User Guide
146
www.nec-computers.com
8. If you are installing a long expansion card, make sure to secure the end
opposite the bracket to ensure that the card does not move inside the chassis.
To do so, rotate the retention tab until it locks the card into place.
Figure 29: Retention tab for Long Expansion Cards
A: Retention tabs (not used)
B: Retention tab (rotated in locked position)
9. If applicable, make any connections specified in the card documentation .
10. Replace the front panel.
See “Replacing the Front Panel” on page 125.
11. Replace the right side door.
See “Replacing the Right Side Door” on page 124.