NEC SA2500 User Manual - Caution
User Guide
185
www.nec-computers.com
To Clean an Optical Drive:
1. Power the system.
The POWER/SLEEP lamp is lit.
2. Press the optical drive tray Open/Close button on the front of the optical drive.
The tray opens.
3. Hold the CD-ROM/CD-RW or DVD-Rom and take it out from the tray.
Note: Do not touch the signal side of the CD-ROM with
your hand.
4. Wipe the tray with a dry soft cloth.
Caution
Do not wipe the lens of the optical drive. Doing so may damage
the lens and may cause a malfunction of the drive.
5. Push on the tray front to close the tray.
To Clean a CD-Rom or CD-RW or DVD-Rom:
Wipe the signal side of the disk with a dry soft cloth.
Caution
■
Wipe disks from the center to the outside.
■
Use only CD-ROM cleaner if necessary. Cleaning a CD-
ROM or CD-RW or DVD-ROM with record spray/cleaner,
benzene, or thinner causes damage to the disk contents. At
worst, inserting the disk into the system may cause failure.