Oce im5530 Printing Manual - page 195
Setting Up the UNIX Filters 193
5
Create the following file.
/etc/lp/interfaces/
6
Add a line as below in the
dest=
7
Save the file.
8
Enter the following command:
mkque -q
-a s_statfilter = /usr/lib/lpd/bsdshort \
-a up = TRUE -a host =
9
Enter the following command:
mkquedev -q
-a backend = /opt/oce/tap/bin/estbwBackend
10
Enter the following command:
cp /usr/lib/lpd/pio/predef/net_estbw \
/opt/oce/tap/filter/
Creating a print queue manually on Linux
1
Enter the following command:
ls /opt/oce/tap/interface
2
If the above directory does not exist, enter the following command:
mkdir /opt/oce/tap/interface
3
As root open your Linux/UNIX editor.
4
Open your Linux/UNIX editor.
5
Create the following file.
/opt/oce/tap/interface/
6
Add a line as below in the
dest=
7
Save the file.
8
Enter the following command:
cp /opt/oce/tap/model/net_estbw \
/opt/oce/tap/interface/
9
Enter the following command:
/opt/oce/tap/bin/modPrintcap \
-a
10
Enter the following command:
ls /opt/oce/tap/bin/flag_
11
If the above file exists, enter the following command.
/opt/oce/tap/bin/printconf_import \
-a
rm /opt/oce/tap/bin/flag_
12
Restart your lpd.