Oce im5530 Printing Manual - page 316
6 Printing from Macintosh
314 Printing from Application on Mac OS X 10.2.4 to Mac OS X 10.4.x
1) Password - Digit 1
Select the first digit of the Document ID.
2) Password - Digit 2
Select the second digit of the Document ID.
3) Password - Digit 3
Select the third digit of the Document ID.
4) Password - Digit 4
Select the forth digit of the Document ID.
5) Password - Digit 5
Select the fifth digit of the Document ID.
— Finishing
In the Finishing menu, you can set destination, hole punching and stapling.
1) Destination
This selects the destination tray.
- Exit Tray — Select this when no finisher is installed.
- Tray 1 — Select this to route the output to the upper tray of the Finisher.
- Tray 2 — Select this to route the output to the lower tray of the Finisher.
y
“Exit Tray” is only available when no finisher is installed.
y
“Tray 1” and “Tray 2” can be selected when the Finisher or Saddle Stitch Finisher are
installed.
2) Hole Punch
This sets whether or not a print job is hole punched.
- Off — Select this to print without hole punches.
1
2
3