Oce im5530 Printing Manual - page 236
5 Printing from Windows
234 Setting Up Print Options
3) Print Paper Size
Select this to enlarge or reduce a page image to fit exactly in the selected paper size. If you
do not wish to enable enlarge or reduce printing, select “Same as Original Size”.
Also when you want to enable Tab printing, select “Letter Tab” or “A4 Tab” here. When you
select “Letter Tab” or “A4 Tab”, the Primary Tab dialog box appears.
— Primary Tab Dialog
Tab Manufacturer
Select the product name of the tab paper that you use. This equipment supports following
tab paper.
If you use tab papers other than above, select “Custom”. When you select “Custom”, you
must specify the tab extension manually.
Tab Extension
Enter the width of the tab extension. This must be set only when “Custom” is selected in the
“Tab Manufacturer” option.
Image Shift Width
Enter the width to shift the printed image.
For example, if you want to print a text on the tab extension of Letter Tab paper, create a Let-
ter sized document and input the text on the right side. You must place the text in the height
exactly to fit to the tab extension. Also the right margin, a margin between the text and right
edge of the document, must have more than 0.08 inch or 2 mm space because the equip-
ment cannot print in the space. Then enter the width of the tab extension as Image Shift
Width.
Units
Select the unit for the Tab Extension and Image Shift option. The default unit varies depend-
ing on the regional setting of the client computer.
For Letter Tab:
Blanks USA copy Tabs (5 Banks) LT + 1/2” Tab
Blanks USA copy Tabs (8 Banks) LT + 1/2” Tab
For A4 Tab:
KOKUYO A4-S (5 Banks)
King JIM A4-S (5Banks)
Tab T
ext
Document
Printed Image
Tab T
ext
Width of Tab Extension = Image Shift Margin
More than 0.2" or 5mm
Must exactly
fit the tab extension