Oce im5530 Printing Manual - page 98

2 Installing Client Software for Windows

96    Installing Client Software for SMB Printing

5

It automatically obtain the network queue in the “Network path or 

queue name” field.

It automatically obtains the IP address of the equipment and the queue name specified 

by an administrator, in the “Network path or queue name” field in the General submenu 

page of the Setup menu in the Printer Utility administrator mode.  If you cannot obtain the 

queue name, ask your administrator that the “Network path or queue name” field is cor-

rectly specified.

6

Continue the installation from step 10 of "Installing the client soft-

ware for SMB printing" on page 85.

Installation for SMB Printing by Point and Print

The procedure to install the printer driver for SMB printing by Point and Print differs depending 

on the version of Windows used.

 P.97 “Windows NT 4.0/2000/XP/Server 2003”

 P.98 “Windows 98/Me”

It assumes using SMB printing by Point and Print in a small network.  If you can use the Win-

dows NT 4.0, Windows 2000, Windows XP, or Windows Server 2003 as a print server, it is rec-

ommended to set up for printing via Windows print server.  For further information about setting 

up printing via a Windows print server, see the Network Administration Guide.

y

Document Monitor is also available for SMB printing.  To install Document Monitor, you must 

install it from the Client Utilities CD-ROM separately.

y

The Font Manager is also available to install and manage the TrueType fonts on your com-

puter.  To install the Font Manager, you must install it from the Font CD-ROM that comes with 

the Printer Kit or Printer/Scanner Kit.

 P.400 “Installing Font Manager”