Oce im5530 Printing Manual - page 282
5 Printing from Windows
280 Printing with Extended Print Functionality
y
Image Shift Width
Enter the width to shift the printed image.
For example, if you want to print a text on the tab extension of Letter Tab paper, create a
Letter sized document and input the text on the right side. You must place the text in the
height exactly to fit to the tab extension. Also the right margin, a margin between the text
and right edge of the document, must have more than 0.08 inch or 2 mm space because
the equipment cannot print in the space. Then enter the width of the tab extension as
Image Shift Width.
y
Unit
Select the unit for the Tab Extension and Image Shift option. The default unit varies
depending on the regional setting of the client computer.
y
The tab paper cannot be fed from LCF (not available for some countries or regions),
External LCF, and Inserter Unit.
y
When you place the tab paper on the drawer, make sure the tab side of the paper
becomes left side.
y
When you place the tab paper on the Bypass Tray, make sure the tab side of the
paper becomes outside.
y
If the document for tab printing is not created properly or the Image Shift Width is not
set properly, the image will not be printed in the correct position within the tab exten-
sion. Please make sure to create the document and set the Image Shift Width cor-
rectly.
y
If mis-printing occurs while multiple tab pages are printed continuously, dirt may
adhere to the reverse side of a paper. To avoid this, it is recommended to print a tab
paper as a separated job for each page so that this equipment performs cleaning
before printing next tab paper.
4
Set other print options you require and click [OK].
Tab T
ext
Document
Printed Image
Tab T
ext
Width of Tab Extension = Image Shift Margin
More than 0.2" or 5mm
Must exactly
fit the tab extension
Place the tab paper
so that the tab side
becomes left side.
Place the tab paper
so that the tab side
becomes outside.