Oce im5530 Printing Manual - page 245
Setting Up Print Options 243
When “Inserter Unit” is selected in the “Source” drop down box, the Inserter Unit Setting dia-
log box appears. In the Inserter Unit Setting dialog box, the following items can be set:
-
Print Paper Size—Select the paper size that you set in the Inserter Unit.
-
Paper Type—Select the paper type that you set in the Inserter Unit.
-
Invert inserted paper—Check this to invert the paper for output. This is useful when
you want to invert the back cover so that the front face of the back cover becomes the
end of the page as the front face of the front cover becomes the first page.
Print Style
This selects how you want to print a cover.
- Do not print on page — Select this to insert a blank cover.
- Print on 1 side of page — Select this to print the first page image on the front side of a
cover.
- Print on both sides of page — Select this to print the first two page images on both
sides of a cover. This is available only when the 2-Sided Printing option is enabled on the
Setup tab.
If “Print on 1 side of page” is selected while 2-Sided Printing is performed, the first page is
printed on the front side of the cover sheet and the back side of the cover will be blank.
2) Use Back Cover
This sets back cover printing which allows you to insert or print a back cover on a sheet fed
from a different tray than the Paper Source option selected on the Setup tab.
To enable back cover printing, check on the box and select the location from where a back
cover sheet is to be fed and the print style to be used.
Source
Select the location from where a back cover sheet is to be fed. When “Automatic” is
selected, the paper is automatically selected according to the printed document size.
The selectable values in the Source drop down box vary depending on the optional devices
installed on this equipment and their configuration on the Configuration tab.